INTEGRATION GUIDE FOR THE TOPCON CL-100, 200, or 300

Serial Cables must be purchased from Topcon prior to integration

TOPCON MACHINE CONFIGURATION

The operators manual for the CL-100 can be downloaded here.

The operators manual for the CL-200 can be downloaded here.

The operators manual for the CL-300 can be downloaded here.

Settings for all 3 machines can be viewed here.

CRYSTAL MACHINE UTILITY CONFIGURATION

Set up the Crystal PM Machine Utility using the following instructions: Crystal PM Machine Integration Utility Setup

Data Speed:	2400
Data Bits:	8
Parity:	None
Stop Bits:	One
Flow Control:	None
Output:	CSV (.csv) output

CRYSTAL CONFIGURATION

Add the Machine:

1. In Crystal, go to the Records tab

2. In Records, navigate to EHR Settings à Import Machines à Select an open Machine Slot

3. A window will open with a list a of machines, click on “Browse for available machines” at the bottom

4. Choose the machine labeled “Topcon CL100 200 300”

5. Browse to the .csv output location (C:\Program Files (x86)\CrystalPM\mach\mach1\mach1.csv)

6. Click open, then leave the Records tab in Crystal and then come back to it (Click on Tasks tab then click back onto records tab.)

Create the button in records:

1. In Records, navigate to EHR Settings à Edit Medical Record Templates

2. At the bottom of the Edit Fields Window click on “Add New Field”

3. Make the field type to be a button

4. Assign the fields in your template to the corresponding fields from the .csv file below:

5. Add field to template and Save Changes

MACHINE BUTTON MAPPING

ID         Data                             Example_________________________________

1 File Location C:\Program Files\CrystalPM\TOPCON\mach\mach1\mach1.csv

2 Time 03:30 PM

3 OD SPH +2.00

4 OD CYL +1.00

5 OD AXIS 100

6 OD ADD 0

7 OD ADD2 0

8 OD Hori Prism O 0.00

9 OD Vert Prism D 0.00

10 OS SPH +2.50

11 OS CYL +1.50

12 OS AXIS 110

13 OS ADD 0

14 OS ADD2 0

15 OS Hori Prism O 0.00

16 OS Vert Prism D 0.00